#----------------------------------------------------------------------------
# Copyright (c) FIRST 2008-2012. All Rights Reserved.
# Open Source Software - may be modified and shared by FRC teams. The code
# must be accompanied by the FIRST BSD license file in the root directory of
# the project.
#----------------------------------------------------------------------------
import threading
import warnings
import hal
from .livewindowsendable import LiveWindowSendable
from .resource import Resource
from ._impl.timertask import TimerTask
from ._impl.utils import match_arglist, HasAttribute
__all__ = ["PIDController"]
[docs]class PIDController(LiveWindowSendable):
"""Can be used to control devices via a PID Control Loop.
Creates a separate thread which reads the given :class:`.PIDSource` and takes
care of the integral calculations, as well as writing the given
:class:`.PIDOutput`.
"""
kDefaultPeriod = .05
instances = 0
# Tolerance is the type of tolerance used to specify if the PID controller
# is on target. The various implementations of this such as
# PercentageTolerance and AbsoluteTolerance specify types of tolerance
# specifications to use.
[docs] def PercentageTolerance_onTarget(self, percentage):
with self.mutex:
return (abs(self.getError()) < percentage / 100
* (self.maximumInput - self.minimumInput))
[docs] def AbsoluteTolerance_onTarget(self, value):
with self.mutex:
return abs(self.getError()) < value
def __init__(self, *args, **kwargs):
"""Allocate a PID object with the given constants for P, I, D, and F
Arguments can be structured as follows:
- Kp, Ki, Kd, Kf, PIDSource, PIDOutput, period
- Kp, Ki, Kd, PIDSource, PIDOutput, period
- Kp, Ki, Kd, PIDSource, PIDOutput
- Kp, Ki, Kd, Kf, PIDSource, PIDOutput
:param Kp: the proportional coefficient
:type Kp: float or int
:param Ki: the integral coefficient
:type Ki: float or int
:param Kd: the derivative coefficient
:type Kd: float or int
:param Kf: the feed forward term
:type Kf: float or int
:param source: Called to get values
:type source: A function, or an object that implements :class:`.PIDSource`
:param output: Receives the output percentage
:type output: A function, or an object that implements :class:`.PIDOutput`
:param period: the loop time for doing calculations. This particularly
effects calculations of the integral and differential terms.
The default is 50ms.
:type period: float or int
"""
p_arg = ("Kp", [float, int])
i_arg = ("Ki", [float, int])
d_arg = ("Kd", [float, int])
f_arg = ("kf", [float, int])
source_arg = ("source", [HasAttribute("pidGet"), HasAttribute("__call__")])
output_arg = ("output", [HasAttribute("pidWrite"), HasAttribute("__call__")])
period_arg = ("period", [float, int])
templates = [[p_arg, i_arg, d_arg, f_arg, source_arg, output_arg, period_arg],
[p_arg, i_arg, d_arg, source_arg, output_arg, period_arg],
[p_arg, i_arg, d_arg, source_arg, output_arg],
[p_arg, i_arg, d_arg, f_arg, source_arg, output_arg]]
_, results = match_arglist('PIDController.__init__',
args, kwargs, templates)
self.P = results.pop("Kp") # factor for "proportional" control
self.I = results.pop("Ki") # factor for "integral" control
self.D = results.pop("Kd") # factor for "derivative" control
self.F = results.pop("Kf", 0.0)# factor for feedforward term
self.pidOutput = results.pop("output")
self.pidInput = results.pop("source")
self.period = results.pop("period", PIDController.kDefaultPeriod)
self.maximumOutput = 1.0 # |maximum output|
self.minimumOutput = -1.0 # |minimum output|
self.maximumInput = 0.0 # maximum input - limit setpoint to this
self.minimumInput = 0.0 # minimum input - limit setpoint to this
self.continuous = False # do the endpoints wrap around? eg. Absolute encoder
self.enabled = False #is the pid controller enabled
self.prevError = 0.0 # the prior sensor input (used to compute velocity)
self.totalError = 0.0 #the sum of the errors for use in the integral calc
self.setpoint = 0.0
self.error = 0.0
self.result = 0.0
self.mutex = threading.RLock()
self.pid_task = TimerTask('PIDTask%d' % PIDController.instances, self.period, self.calculate)
self.pid_task.start()
# Need this to free on unit test wpilib reset
Resource._add_global_resource(self)
PIDController.instances += 1
hal.HALReport(hal.HALUsageReporting.kResourceType_PIDController,
PIDController.instances)
[docs] def free(self):
"""Free the PID object"""
# TODO: is this useful in Python? Should make TableListener weakref.
with self.mutex:
self.pid_task.cancel()
self.pidInput = None
self.pidOutput = None
[docs] def calculate(self):
"""Read the input, calculate the output accordingly, and write to the
output. This should only be called by the PIDTask and is created
during initialization."""
with self.mutex:
if self.pidInput is None:
return
if self.pidOutput is None:
return
enabled = self.enabled # take snapshot of these values...
pidInput = self.pidInput
if enabled:
with self.mutex:
input = pidInput()
self.error = self.setpoint - input
if self.continuous:
if abs(self.error) > ((self.maximumInput - self.minimumInput) / 2.0):
if self.error > 0:
self.error = self.error \
- self.maximumInput + self.minimumInput
else:
self.error = self.error \
+ self.maximumInput - self.minimumInput
if self.I != 0:
potentialIGain = (self.totalError + self.error) * self.I
if potentialIGain < self.maximumOutput:
if potentialIGain > self.minimumOutput:
self.totalError += self.error
else:
self.totalError = self.minimumOutput / self.I
else:
self.totalError = self.maximumOutput / self.I
self.result = self.P * self.error + \
self.I * self.totalError + \
self.D * (self.error - self.prevError) + \
self.setpoint * self.F
self.prevError = self.error
if self.result > self.maximumOutput:
self.result = self.maximumOutput
elif self.result < self.minimumOutput:
self.result = self.minimumOutput
pidOutput = self.pidOutput
result = self.result
pidOutput(result)
[docs] def setPID(self, p, i, d, f=None):
"""Set the PID Controller gain parameters.
Set the proportional, integral, and differential coefficients.
:param p: Proportional coefficient
:param i: Integral coefficient
:param d: Differential coefficient
:param f: Feed forward coefficient (optional)
"""
with self.mutex:
self.P = p
self.I = i
self.D = d
if f is not None:
self.F = f
table = self.getTable()
if table is not None:
table.putNumber("p", p)
table.putNumber("i", i)
table.putNumber("d", d)
if f is not None:
table.putNumber("f", f)
[docs] def getP(self):
"""Get the Proportional coefficient.
:returns: proportional coefficient
"""
with self.mutex:
return self.P
[docs] def getI(self):
"""Get the Integral coefficient
:returns: integral coefficient
"""
with self.mutex:
return self.I
[docs] def getD(self):
"""Get the Differential coefficient.
:returns: differential coefficient
"""
with self.mutex:
return self.D
[docs] def getF(self):
"""Get the Feed forward coefficient.
:returns: feed forward coefficient
"""
with self.mutex:
return self.F
[docs] def get(self):
"""Return the current PID result.
This is always centered on zero and constrained the the max and min
outs.
:returns: the latest calculated output
"""
with self.mutex:
return self.result
[docs] def setContinuous(self, continuous=True):
"""Set the PID controller to consider the input to be continuous.
Rather then using the max and min in as constraints, it considers them
to be the same point and automatically calculates the shortest route
to the setpoint.
:param continuous: Set to True turns on continuous, False turns off
continuous
"""
with self.mutex:
self.continuous = continuous
[docs] def setOutputRange(self, minimumOutput, maximumOutput):
"""Sets the minimum and maximum values to write.
:param minimumOutput: the minimum percentage to write to the output
:param maximumOutput: the maximum percentage to write to the output
"""
with self.mutex:
if minimumOutput > maximumOutput:
raise ValueError("Lower bound is greater than upper bound")
self.minimumOutput = minimumOutput
self.maximumOutput = maximumOutput
[docs] def setSetpoint(self, setpoint):
"""Set the setpoint for the PIDController.
:param setpoint: the desired setpoint
"""
with self.mutex:
if self.maximumInput > self.minimumInput:
if setpoint > self.maximumInput:
newsetpoint = self.maximumInput
elif setpoint < self.minimumInput:
newsetpoint = self.minimumInput
else:
newsetpoint = setpoint
else:
newsetpoint = setpoint
self.setpoint = newsetpoint
table = self.getTable()
if table is not None:
table.putNumber("setpoint", newsetpoint)
[docs] def getSetpoint(self):
"""Returns the current setpoint of the PIDController.
:returns: the current setpoint
"""
with self.mutex:
return self.setpoint
[docs] def getError(self):
"""Returns the current difference of the input from the setpoint.
:return: the current error
"""
with self.mutex:
#return self.error
return self.getSetpoint() - self.pidInput()
[docs] def setTolerance(self, percent):
"""Set the percentage error which is considered tolerable for use with
:func:`onTarget`. (Input of 15.0 = 15 percent)
:param percent: error which is tolerable
.. deprecated:: 2015.1
Use :func:`setPercentTolerance` or :func:`setAbsoluteTolerance`
instead.
"""
warnings.warn("use setPercentTolerance or setAbsoluteTolerance instead",
DeprecationWarning)
with self.mutex:
self.onTarget = lambda: \
self.PercentageTolerance_onTarget(percent)
[docs] def setAbsoluteTolerance(self, absvalue):
"""Set the absolute error which is considered tolerable for use with
:func:`onTarget`.
:param absvalue: absolute error which is tolerable in the units of the
input object
"""
with self.mutex:
self.onTarget = lambda: \
self.AbsoluteTolerance_onTarget(absvalue)
[docs] def setPercentTolerance(self, percentage):
"""Set the percentage error which is considered tolerable for use with
:func:`onTarget`. (Input of 15.0 = 15 percent)
:param percentage: percent error which is tolerable
"""
with self.mutex:
self.onTarget = lambda: \
self.PercentageTolerance_onTarget(percentage)
[docs] def onTarget(self):
"""Return True if the error is within the percentage of the total input
range, determined by setTolerance. This assumes that the maximum and
minimum input were set using :func:`setInput`.
:returns: True if the error is less than the tolerance
"""
raise ValueError("No tolerance value set when using PIDController.onTarget()")
[docs] def enable(self):
"""Begin running the PIDController."""
with self.mutex:
self.enabled = True
table = self.getTable()
if table is not None:
table.putBoolean("enabled", True)
[docs] def disable(self):
"""Stop running the PIDController, this sets the output to zero before
stopping."""
with self.mutex:
self.pidOutput(0)
self.enabled = False
table = self.getTable()
if table is not None:
table.putBoolean("enabled", False)
[docs] def isEnable(self):
"""Return True if PIDController is enabled."""
with self.mutex:
return self.enabled
[docs] def reset(self):
"""Reset the previous error, the integral term, and disable the
controller."""
with self.mutex:
self.disable()
self.prevError = 0
self.totalError = 0
self.result = 0
def getSmartDashboardType(self):
return "PIDController"
def valueChanged(self, table, key, value, isNew):
if key == "p" or key == "i" or key == "d" or key == "f":
Kp = table.getNumber("p", 0.0)
Ki = table.getNumber("i", 0.0)
Kd = table.getNumber("d", 0.0)
Kf = table.getNumber("f", 0.0)
if (self.getP() != Kp or self.getI() != Ki or self.getD() != Kd or
self.getF() != Kf):
self.setPID(Kp, Ki, Kd, Kf)
elif key == "setpoint":
if self.getSetpoint() != float(value):
self.setSetpoint(float(value))
elif key == "enabled":
if self.isEnable() != bool(value):
if bool(value):
self.enable()
else:
self.disable()
def initTable(self, table):
oldtable = self.getTable()
if oldtable is not None:
oldtable.removeTableListener(self.valueChanged)
self.table = table
if table is not None:
table.putNumber("p", self.getP())
table.putNumber("i", self.getI())
table.putNumber("d", self.getD())
table.putNumber("f", self.getF())
table.putNumber("setpoint", self.getSetpoint())
table.putBoolean("enabled", self.isEnable())
table.addTableListener(self.valueChanged, False)
def startLiveWindowMode(self):
self.disable()
def stopLiveWindowMode(self):
pass