Source code for wpilib.analoginput
#----------------------------------------------------------------------------
# Copyright (c) FIRST 2008-2012. All Rights Reserved.
# Open Source Software - may be modified and shared by FRC teams. The code
# must be accompanied by the FIRST BSD license file in the root directory of
# the project.
#----------------------------------------------------------------------------
import hal
from .livewindow import LiveWindow
from .resource import Resource
from .sensorbase import SensorBase
from .timer import Timer
__all__ = ["AnalogInput"]
[docs]class AnalogInput(SensorBase):
"""Analog input
Each analog channel is read from hardware as a 12-bit number representing
0V to 5V.
Connected to each analog channel is an averaging and oversampling engine.
This engine accumulates the specified (by :func:`setAverageBits` and
:func:`setOversampleBits`) number of samples before returning a new value.
This is not a sliding window average. The only difference between the
oversampled samples and the averaged samples is that the oversampled
samples are simply accumulated effectively increasing the resolution,
while the averaged samples are divided by the number of samples to retain
the resolution, but get more stable values.
"""
kAccumulatorSlot = 1
kAccumulatorChannels = (0, 1)
channels = Resource(SensorBase.kAnalogInputChannels)
def __init__(self, channel):
"""Construct an analog channel.
:param channel: The channel number to represent. 0-3 are on-board 4-7 are on the MXP port.
"""
if not hal.checkAnalogInputChannel(channel):
raise IndexError("Analog input channel %d cannot be allocated. Channel is not present." % channel)
try:
AnalogInput.channels.allocate(self, channel)
except IndexError as e:
raise IndexError("Analog input channel %d is already allocated" % channel) from e
self.channel = channel
self.accumulatorOffset = 0
port = hal.getPort(channel)
self.port = hal.initializeAnalogInputPort(port)
LiveWindow.addSensorChannel("AnalogInput", channel, self)
hal.HALReport(hal.HALUsageReporting.kResourceType_AnalogChannel,
channel)
[docs] def free(self):
if self.channel is None:
return
AnalogInput.channels.free(self.channel)
self.channel = None
self.accumulatorOffset = 0
[docs] def getValue(self):
"""Get a sample straight from this channel. The sample is a 12-bit
value representing the 0V to 5V range of the A/D converter. The units
are in A/D converter codes. Use :func:`getVoltage` to get the analog
value in calibrated units.
:returns: A sample straight from this channel.
"""
return hal.getAnalogValue(self.port)
[docs] def getAverageValue(self):
"""Get a sample from the output of the oversample and average engine
for this channel. The sample is 12-bit + the bits configured in
:func:`setOversampleBits`. The value configured in
:func:`setAverageBits` will cause this value to be averaged 2**bits
number of samples. This is not a sliding window. The sample will not
change until 2^(OversampleBits + AverageBits) samples have been
acquired from this channel. Use :func:`getAverageVoltage` to get the
analog value in calibrated units.
:returns: A sample from the oversample and average engine for this
channel.
"""
return hal.getAnalogAverageValue(self.port)
[docs] def getVoltage(self):
"""Get a scaled sample straight from this channel. The value is scaled
to units of Volts using the calibrated scaling data from
:func:`getLSBWeight` and :func:`getOffset`.
:returns: A scaled sample straight from this channel.
"""
return hal.getAnalogVoltage(self.port)
[docs] def getAverageVoltage(self):
"""Get a scaled sample from the output of the oversample and average
engine for this channel. The value is scaled to units of Volts using
the calibrated scaling data from :func:`getLSBWeight` and
:func:`getOffset`. Using oversampling will cause this value to be
higher resolution, but it will update more slowly. Using averaging
will cause this value to be more stable, but it will update more
slowly.
:returns: A scaled sample from the output of the oversample and average
engine for this channel.
"""
return hal.getAnalogAverageVoltage(self.port)
[docs] def getLSBWeight(self):
"""Get the factory scaling least significant bit weight constant. The
least significant bit weight constant for the channel that was
calibrated in manufacturing and stored in an eeprom.
Volts = ((LSB_Weight * 1e-9) * raw) - (Offset * 1e-9)
:returns: Least significant bit weight.
"""
return hal.getAnalogLSBWeight(self.port)
[docs] def getOffset(self):
"""Get the factory scaling offset constant. The offset constant for the
channel that was calibrated in manufacturing and stored in an eeprom.
Volts = ((LSB_Weight * 1e-9) * raw) - (Offset * 1e-9)
:returns: Offset constant.
"""
return hal.getAnalogOffset(self.port)
[docs] def getChannel(self):
"""Get the channel number.
:returns: The channel number.
"""
return self.channel
[docs] def setAverageBits(self, bits):
"""Set the number of averaging bits. This sets the number of
averaging bits. The actual number of averaged samples is 2^bits.
The averaging is done automatically in the FPGA.
:param bits: The number of averaging bits.
"""
hal.setAnalogAverageBits(self.port, bits)
[docs] def getAverageBits(self):
"""Get the number of averaging bits. This gets the number of averaging
bits from the FPGA. The actual number of averaged samples is 2^bits.
The averaging is done automatically in the FPGA.
:returns: The number of averaging bits.
"""
return hal.getAnalogAverageBits(self.port)
[docs] def setOversampleBits(self, bits):
"""Set the number of oversample bits. This sets the number of
oversample bits. The actual number of oversampled values is 2^bits.
The oversampling is done automatically in the FPGA.
:param bits: The number of oversample bits.
"""
hal.setAnalogOversampleBits(self.port, bits)
[docs] def getOversampleBits(self):
"""Get the number of oversample bits. This gets the number of
oversample bits from the FPGA. The actual number of oversampled values
is 2^bits. The oversampling is done automatically in the FPGA.
:returns: The number of oversample bits.
"""
return hal.getAnalogOversampleBits(self.port)
[docs] def initAccumulator(self):
"""Initialize the accumulator.
"""
if not self.isAccumulatorChannel():
raise IndexError(
"Accumulators are only available on slot %d on channels %s"
% (AnalogInput.kAccumulatorSlot,
",".join(str(c) for c in AnalogInput.kAccumulatorChannels)))
self.accumulatorOffset = 0
hal.initAccumulator(self.port)
[docs] def setAccumulatorInitialValue(self, initialValue):
"""Set an initial value for the accumulator.
This will be added to all values returned to the user.
:param initialValue:
The value that the accumulator should start from when reset.
"""
self.accumulatorOffset = initialValue
[docs] def resetAccumulator(self):
"""Resets the accumulator to the initial value.
"""
hal.resetAccumulator(self.port)
# Wait until the next sample, so the next call to getAccumulator*()
# won't have old values.
sampleTime = 1.0 / AnalogInput.getGlobalSampleRate()
overSamples = 1 << self.getOversampleBits()
averageSamples = 1 << self.getAverageBits()
Timer.delay(sampleTime * overSamples * averageSamples)
[docs] def setAccumulatorCenter(self, center):
"""Set the center value of the accumulator.
The center value is subtracted from each A/D value before it is added
to the accumulator. This is used for the center value of devices like
gyros and accelerometers to make integration work and to take the
device offset into account when integrating.
This center value is based on the output of the oversampled and
averaged source from channel 1. Because of this, any non-zero
oversample bits will affect the size of the value for this field.
"""
hal.setAccumulatorCenter(self.port, center)
[docs] def setAccumulatorDeadband(self, deadband):
"""Set the accumulator's deadband.
"""
hal.setAccumulatorDeadband(self.port, deadband)
[docs] def getAccumulatorValue(self):
"""Read the accumulated value.
Read the value that has been accumulating. The accumulator
is attached after the oversample and average engine.
:returns: The 64-bit value accumulated since the last :func:`reset`.
"""
return hal.getAccumulatorValue(self.port) + self.accumulatorOffset
[docs] def getAccumulatorCount(self):
"""Read the number of accumulated values.
Read the count of the accumulated values since the accumulator was
last :func:`reset`.
:returns: The number of times samples from the channel were
accumulated.
"""
return hal.getAccumulatorCount(self.port)
[docs] def getAccumulatorOutput(self):
"""Read the accumulated value and the number of accumulated values
atomically.
This function reads the value and count from the FPGA atomically. This
can be used for averaging.
:returns: tuple of (value, count)
"""
if not self.isAccumulatorChannel():
raise IndexError("Channel %d is not an accumulator channel." % self.channel)
return hal.getAccumulatorOutput(self.port)
[docs] def isAccumulatorChannel(self):
"""Is the channel attached to an accumulator.
:returns: The analog channel is attached to an accumulator.
"""
return self.channel in AnalogInput.kAccumulatorChannels
@staticmethod
[docs] def setGlobalSampleRate(samplesPerSecond):
"""Set the sample rate per channel.
This is a global setting for all channels.
The maximum rate is 500kS/s divided by the number of channels in use.
This is 62500 samples/s per channel if all 8 channels are used.
:param samplesPerSecond: The number of samples per second.
"""
hal.setAnalogSampleRate(float(samplesPerSecond))
@staticmethod
[docs] def getGlobalSampleRate():
"""Get the current sample rate.
This assumes one entry in the scan list. This is a global setting for
all channels.
:returns: Sample rate.
"""
return hal.getAnalogSampleRate()
[docs] def pidGet(self):
"""Get the average voltage for use with PIDController
:returns: the average voltage
"""
return self.getAverageVoltage()
# Live Window code, only does anything if live window is activated.
def getSmartDashboardType(self):
return "Analog Input"
def updateTable(self):
table = self.getTable()
if table is not None:
table.putNumber("Value", self.getAverageVoltage())
def startLiveWindowMode(self):
# Analog Channels don't have to do anything special when entering the
# LiveWindow.
pass
def stopLiveWindowMode(self):
# Analog Channels don't have to do anything special when exiting the
# LiveWindow.
pass