# validated: 2018-01-01 DV 02131639bc2c edu/wpi/first/wpilibj/DMC60.java
#----------------------------------------------------------------------------
# Copyright (c) 2008-2017 FIRST. All Rights Reserved.
# Open Source Software - may be modified and shared by FRC teams. The code
# must be accompanied by the FIRST BSD license file in the root directory of
# the project.
#----------------------------------------------------------------------------
#import hal
from .pwmspeedcontroller import PWMSpeedController
__all__ = ["DMC60"]
[docs]class DMC60(PWMSpeedController):
"""
Digilent DMC 60 Speed Controller.
"""
def __init__(self, channel: int):
"""Constructor.
:param channel: The PWM channel that the DMC60 is attached to.
0-9 are on-board, 10-19 are on the MXP port.
.. note ::
The DMC60 uses the following bounds for PWM values. These values
should work reasonably well for most controllers, but if users
experience issues such as asymmetric behavior around the deadband
or inability to saturate the controller in either direction,
calibration is recommended. The calibration procedure can be
found in the DMC 60 User Manual available from Digilent.
- 2.004ms = full "forward"
- 1.520ms = the "high end" of the deadband range
- 1.500ms = center of the deadband range (off)
- 1.480ms = the "low end" of the deadband range
- 0.997ms = full "reverse"
"""
super().__init__(channel)
self.setBounds(2.004, 1.52, 1.50, 1.48, .997)
self.setPeriodMultiplier(self.PeriodMultiplier.k1X)
self.setSpeed(0)
self.setZeroLatch()
#hal.report(hal.UsageReporting.kResourceType_VictorSP, self.getChannel())
self.setName("DMC60", self.getChannel())