# validated: 2016-11-26 DS ecb2add79137 athena/java/edu/wpi/first/wpilibj/TalonSRX.java
#----------------------------------------------------------------------------
# Copyright (c) FIRST 2008-2012. All Rights Reserved.
# Open Source Software - may be modified and shared by FRC teams. The code
# must be accompanied by the FIRST BSD license file in the root directory of
# the project.
#----------------------------------------------------------------------------
import hal
from .livewindow import LiveWindow
from .pwmspeedcontroller import PWMSpeedController
__all__ = ["TalonSRX"]
[docs]class TalonSRX(PWMSpeedController):
"""
Cross the Road Electronics (CTRE) Talon SRX Speed Controller via PWM
.. seealso:: See :class:`.CANTalon` for CAN control of Talon SRX.
"""
def __init__(self, channel):
"""Constructor for a TalonSRX connected via PWM.
:param channel: The PWM channel that the TalonSRX is attached to. 0-9 are on-board, 10-19 are on the MXP port.
:type channel: int
.. note ::
The TalonSRX uses the following bounds for PWM values. These values
should work reasonably well for most controllers, but if users
experience issues such as asymmetric behavior around the deadband
or inability to saturate the controller in either direction,
calibration is recommended. The calibration procedure can be
found in the TalonSRX User Manual available from CTRE.
- 2.004ms = full "forward"
- 1.520ms = the "high end" of the deadband range
- 1.500ms = center of the deadband range (off)
- 1.480ms = the "low end" of the deadband range
- 0.997ms = full "reverse"
"""
super().__init__(channel)
self.setBounds(2.004, 1.52, 1.50, 1.48, .997)
self.setPeriodMultiplier(self.PeriodMultiplier.k1X)
self.setSpeed(0)
self.setZeroLatch()
LiveWindow.addActuatorChannel("TalonSRX", self.getChannel(), self)
hal.report(hal.UsageReporting.kResourceType_TalonSRX,
self.getChannel())